Movinord Overview |
General DimensionsHorizontal module size between axes: Standard 1,200mm (0ther module sizes on request)Standard height floor/ceiling: 2,700 and 3,100mm Maximum height floor/ceilng: standard 3,100mm (for greater heights consult the configuration limits) Height tolerance capacity: +- 20mm Partition total thickness: 80mm Weight/sg.m (Solid plaster boards) 24.6 kg/sq.m
|
![[ Top ]](images/top.gif){kind=small}
StructureGalvanized steel according to EN 10 142 Fe P02 G Z100 MC.Thickness: 0.75, 0.80 and 0.90mm
|
PaintDegreased pretreatmentElectrostatic Polyester or Epoxi/polyester powder spray paint application, stoved at 200C Average thickness of paint coat: 50 microns Colour contral: to DIN 5033
|
External Facing, Mineral Fibre, Glass, and Doors- Plasterboard external panels, thickness 12.7mm coated with semi-rigid vinyls, or vinyls with cellulose base, or textures with textile base alternative options: chipboard coated with vinyls, melamines, laminates, woods. etc Total thickness 13mm- Special rock wool internal isolation for vertical facings, density 40 kg/sq.m, thickness 50mm - Solid chipboard door panels, coated with vinyls as stated above, dimensions 830 x 2,040 x 40mm, weight 40 kg/unit. Alternative options: Lightened panels, glass. Clarit etc. variour coatings similar to the ones applied on the panels. dimensions 830 x 2,040 x 40mm. maximum weight 90 kg/unit - Glass thickness between 4 and 6mm. Free space between double glass 52mm
|
Accessories- Hinge surface finish Polyester or Epoxi/polyester powder paint- Rest of metalic accessories zinc coated galvanised, bluing or powder paint according to the requirements
|
Disassembly, Re-installation- Glass disassembly independent of structure, due to its perimetric glazing bead on both sides- Complete disassembly and independent of all the components by the splice-clip fixing - Modules can be reinstalled and interchanged: 100% (CERFF Certificate of Partitions 22/6/87.
|
Mechanical ResistanceSoft body impact stability (regulation CERFF 50 daN):· Immediate deformation 43mm · Residual deformation: 1mm Resistance to the horizontal thrust (regulation CERFF 50 daN): · Load deformaton: 12 mm · Residual deformation: 0mm Door module (regulation CERFF 60,000 opening cycles): . Without wear, deformation or degradation.
|
Sound reduction and fire resistanceAll the components of the Movinord system comply with the normal acoustic and fire regulations and have gained test certificates, in Spain as well as in other E.U. countries.The mass of the different components, the mineral fibre layer throughout the modules, and the perimeter elastic joint detail provide an average noise insulation rate of 42 dBA for a solid module acording to UNE-74040 and of Rw 44 db according to ISO-717 The solid internal steel structure, combined with the plasterboard panels produce a stable partitioning system in the presence of fire. The system has been certified to meet a fire resistance of 60 minutes according to UNE-23-802-79
|
Modules
| ||||||||||||||||||||||||||||||||||||||||
Horizontal section diagrams |
Assemblies |
Some vertical section diagrams
| ||||||||||
|
Movinord Overview |
 |
|
AET Homepage
Introduction to FSS
AET Consultancy
Hiross Air Conditioning
Nesite Raised Access Floors
AET Venitzia Range of Carpet Tiles
Electropatent underfloor cabling
Movinord Partitioning
|
